Last Updated
8/17/2010
8/17/2010
Click here to see all FAQ entries
- Does Autodesk Inventor® support Multiple Displays?
- Does Autodesk Inventor ® support the /3GB switch on windows XP SP1 or newer?
- What is the use of the Hardware tab in Tools > Application Options...?
- I installed an older graphics certified driver, but Autodesk Inventor® says it is not certified.
- My Drawings contain unreadable or incorrect text
- I have an Elsa graphics card and can no longer find drivers
- My Workstation freezes up when Autodesk Inventor® is running
- I wish to have more control over how Autodesk Inventor® uses the graphics card or to understand the new hardware tab.
- I wish to enter custom settings for my graphics card
- My driver was listed in a previous version of Autodesk Inventor®. It is no longer listed.
- I want to play around with the graphics settings for my card
- I just bought a CAD graphics card that is not supported by Autodesk Inventor®
- Should I use the Autodesk Inventor® setting on my graphics card?
- What information is needed to report a graphics problem?
- Running an old Graphics Driver?
- I have just installed a new driver on Windows 2000 or Windows XP, but have very slow performance.
- I have installed a tested driver correctly and I do not have any hardware acceleration or it is still using GDI Generic mode.
- I have installed the certified driver, but my system is unstable.
- I open a few graphics windows with acceleration, but the next window is very slow.
- Autodesk Inventor® has a fatal exception in a dll that contains"OGL" or"GL" as part of its name.
- Autodesk Inventor® crashes when opening the first graphics window (new part, assembly, or drawing)
- I am using a graphics driver that was listed on a previous graphics web page. I noticed that the latest web page no longer lists my driver. Does this mean that my driver has been de-listed because of some major problem?
- I am running an older version of Autodesk Inventor®. I noticed that the newest version of Autodesk Inventor® has a newer graphics driver than the one listed for my version of Autodesk Inventor®. Can I use the newer driver.
- My driver is listed in the certified chart, but I can not find the performance information for this card.
- The performance chart does not list the version of the driver that was used for the test. What version was used?
- Why do two supposedly different graphics cards rotate an assembly at the same speed?
- What does WHQL mean?
- Should I update my driver for my IBM ThinkPad A19p to A21p?
- What is Mip-mapping?
- Can I change Texture Font resolution?
- What is Full or Limited CAD Functionality?
- What is the "Package Version" I see listed for ATI?
- Why does Autodesk Inventor® run very slow when my laptop is on battery power?
- Potential Network Licensing Problems:
- Autodesk Inventor® Network license: Starting with R9:
- Network installation and subscription support for Autodesk Inventor® 10:
- Sharing AIS and AIP licenses:
- Required ATI Unified Driver Install and Setup Process:
- General Driver Install and Setup Process:
- Why is image quality degraded when the image is Rotating, Orbiting, or Panning?
- Why are details missing or "faceted" when I zoom in on an assembly or part?
- Why does my mouse slow down inside the Autodesk Inventor®?
- When printing a drawing, text is spread all over the drawing. What can I do?
- How should I setup my antivirus software?
- How Do I make maintain Subscription support in a mixed AIS/AIP network deployment environment?
- All windows sometimes paint very slowly on the screen.
- How can I improve capacity for large assemblies or drawings?
- What are the problems with using BlackIce
- How do I find my driver version?
- Best Practices for stable graphics and performance
- Can I improve the look of "Stroke Fonts" imported from Autodesk AutoCAD or other sources.
- Autodesk Inventor® Network license: Before R9.
Note: It is highly recommended that you download and install the driver certified on this web site before reporting problems.